We are supplying all kinds of horizontal check valve and vertical check valves. Usually we call them swing check valve and spring check valve. The check valves with brass color, plastic core or brass core. The brass check valve size from 1/2” to 4”, the check valve thread standard: ISO228/ISO7.
Archive for the ‘ball valve’ Category
Check Valves
Sunday, March 28th, 2010
Bathroom accessories are popularly used in every house
Wednesday, November 18th, 2009Bathroom accessories are popularly used in every house or public buildings, they are including robe hook, towel ring, towel bar, soap holder, paper holder, toilet brush holders, towel holder and so on. All these items are available.
Our company have 3 holding factories, separately for ball valves, brass fittings and radiators. And we have more than 12 joint-venture factories for other different products in sanitary wares. Our products are mainly sold to Europe and America. Especially to France, Spain, Italy, Poland, Ukraine and Russia
Our products are mainly sales to Asia, America and Europe, especially to Span, Italy, Poland, Ukraine and Russia. In year 2005, our turn over is totally US$20,000,000.
“Good quality, Best & quick service, Reasonable price” are our three advantages. We are looking forward to build our good cooperation and friendship with all the customers from the world.
formidable ball valve
Monday, November 9th, 2009We can also supply the ball valves for pex-al-pex pipes. this past Saturday, we received a call from a homeowner that his water heater was leaking. When we arrived, we found that the leak was caused by a fitting and not the water heater itself. Now in order to replace the fitting, we would have to shut the water off. We turned the water off at the gate valve and completed the work. When we went to turn the water back on, the handle just spun and spun. The gate valve had sheared off and wouldn’t allow any water to pass. The gate valve would need to be replaced…this time with a more formidable ball valve.
A gate valve is a cheaper alternative to a ball valve, although by only a few dollars. Depending on the size, a gate valve costs around $5 and a ball valve is usually under $10.
Both types of valves have the same purpose, which is to control the flow of water. The design of each, however, is vastly different.
A gate valve has a round knob on top that you turn. This motion raises or lowers a gate inside of the housing to stop or start the flow of water. These valves are prone to failure as they age because they can corrode.
A ball valve is a man among boys. Instead of a knob, it uses a lever. This valve has positive stops machined in that allows the lever to move only 90 degrees. When the lever is parallel to the pipe, the valve is open and water will flow. If the lever is perpendicular to the pipe, the valve is closed.
If you were to cut a ball valve open, you would see that the lever is connected to a ball with a hole bored through the center of it. This is where the water passes through. Turning the water on and off is only a matter of throwing the lever 90 degrees.
Because of the round handle on a gate valve, it’s hard to tell if the valve is open or closed, and when the valve is broken, you end up turning the knob one way and then the other without accomplishing anything. In some cases, the gate will corrode and separate from the lifting mechanism and drop. It will come to rest at the bottom of the valve and cut off the flow of water.
The long and short of it is if you are going to replace the valve, spend a few extra dollars and install a ball valve. water filter
Whole House Water Filter
Friday, October 16th, 2009WHOLE HOUSE WATER FILTER - SEDIMENT ONLY
This sediment prefilter housing and cartridge is designed for 1″ main water lines, with 15 gpm peak recommended flow. The replaceable pleated cartridge removes sediment, silt, sand, dirt and cysts down to 1 micron (lasts about 6 months). Housing accepts any industry-standard 9 3/4″ long by 4 1/2″ diameter cartridges. Inlet and outlet are 1″ female pipe threads.
The Melt blown micro-fiber is self-bonded and formed a 3D pore structure. Diameter and density of micro-fiber can be varying from inner to outer of the filter diameter. Melt Blown Depth water filter Cartridges is designed to have continuously graded pore structure provide both pre-filtration and final-filtration.
We are supplying different kinds of water filters, ball valve, the countertop filter series are made from AS and ABS, they are suitable for the family,hotel and restaurant.You can choose proper water filter cartridges. Proper water filter cartridge can remove odor, smell, color, and even organic chemicals. And the water filters can be assembled in different stages, such as 3 stages and 5stages as usual. It is depended by the people requirements.
Quarter-turn valves
Monday, October 12th, 2009The rugged, one-piece, forged Power ball valve, is built to take the toughest steam isolation applications in your plant – vent, drain, blowoff, intermittent blowdown – with the performance and reliability that you have come to expect from Velan.
- In reduced port ball valves, flow through the valve is one pipe size smaller than the valve’s pipe size resulting in flow area becoming lesser than pipe. But the flow discharge remains constant as it is a Multipler factor of Flow discharge(Q) is equal to Area of Flow (A) into Velocity (V). A1V1=A2V2 i.e the Velocity increase with reduced Area of flow and Velocity decreases with increased area of flow. Bibcocks
- A V port ball valve has either a ‘v’ shaped ball or a ‘v’ shaped seat. This allows the orifice to be opened and closed in a more controlled manner with a closer to linear flow characteristic. When the valve is in the closed position and opening is commenced the small end of the ‘v’ is opened first allowing stable flow control during this stage. This type of design requires a generally more robust construction due to higher velocities of the fluids, which would quickly damage a standard valve.
- A trunnion ball valve has a mechanical means of anchoring the ball at the top and the bottom, this design is usually applied on larger and higher pressure valves (say, 4″ and above 600 psi and above).
Valve
Monday, October 5th, 2009Angle Hose Valve made of cast brass for use with hose storage devices and hydrants. Has a 300lb.
Pressure Reducing Angle Valve made of cast brass can be adjusted to restrict pressures up to 175lbs. Locking pin device restricts full opening of valve by untrained personnel. Pin may be removed by fire personnel to allow full open valve.
Gate Valve made of cast brass for use on standpipes, fire pumps or hydrants. Has a straightway pattern, non rising stem and is rated at 300lbs.
Single Hydrant Gate Valve made of cast brass for use on standpipes, fire pumps or hydrants. Has a straightway pattern, non rising stem and is rated at 300lbs. U.L. Listed and FM Approved.
Stainless Steel Sinks
Friday, September 25th, 2009We are specialized in producing stainless steel sink, vanity bowl and bathroom basin .
Restaurant Stainless Steel Sink
1)Model:AT714
2)Material:ss304
3)MOQ:100pcs
4)High quality+reasonable price+best service
Cleaning Stainless Steel Revolution
Wipe on wipe off The power and speed of Quickleen’s advanced technology cleaner makes it the stainless steel cleaning product of choice for every householder, chef, cleaning company etc… every time.
Quickleen … sanitizes killing 99.9% of germs, is safe to touch, smells fresh, usable without gloves without the need for tedious scrubbing, and is Safe on the environment. ball valves, Free Directory
Quickleen.
One Tub of Quickleen replaces a dozen of other supermarket cleaning products saving money and time, Making valuable room in your cleaning cupboard shelves.
PPR Fittings Features
Monday, September 21st, 2009PPR Fittings: 90 degrees Elbow (Soc) , sizes ranging from 16 to 160mm, approved by ISO.
Features:
- Material: Polypropylene
- Sizes: 16 to 160 mm
- Pressure Rating: 2.5MPa
- Colors: light gray, white or other colors available upon request
- Connection: socket fusion joint
- Standard: ISO 15874: 2003
- Certification: SAI, ISO9001, ISO14001, OHSAS18001
- Applications: cold or hot water supply, heating system including flooring heating, wall heating and radiant, central air conditioning, industrial liquids transportation.
Advantages:
-
High temperature resistance: the maximum sustained working temperature is up to 70 degrees, the maximum transient temperature is up to 95 degrees
-
Heat preservation: low thermal conductivity result in preserving heat
-
Non-toxic: no heavy metal additives, would not be covered with dirt or contaminated by bacterium
-
Lower installation costs: light weight and ease of installation can reduce installation costs
-
Higher flow capacity: smooth interior walls result in low pressure loss and high volume
Newsun Industy is one of the important manufacturing and exporting companies in China. We are dealing in sanitary wares, tools and plastic moulds for more than 10 years. Such as faucets, valves, fittings, radiators, pipes, sinks, plastic drainers, bathroom accessories, plastic moulds and so on. ball valve
zinc bibcock
Monday, September 14th, 2009Hose Bibcock:1)polished and chrome-plated
2)rubber PTFE
3)zinc handle
4)size:1/2″-3/4″ body:15cm 11cm
specific style according to customers’ requirement
The quality of products are examined by local Surveillance bureau.
Brass bibcock
size:1/2” x 3/4” 3/4″x3/4″
body:brass
handle:steel/brass /iron/plastic
We supply bibcocks,brass bibcocks with big quantities, the bibcocks,brass bibcocks are made from brass and nickel plated, steel and aluminium handles are both available. The size of our bibcocks,brass bibcocks are from 1/2″ to 1 1/4″.
plastic drainage and plastic drainer
Tuesday, September 8th, 2009name:plastic floor drainer,plastic strainer,plastic drainage,plastic drainer,floor drainage,basket strainer,floor leak
Characteristics:
1.Material: ABS Plastic.
2.Draining water
3.Superiority:1)Excellent quality 2)More competive price
4.Packing:Strictly making the master carton according to
the exporting standard.
5.Exporting Places:Exported to all over the world.
Plastic Drainer
1. 1-1/4” Bottle Trap
2. Material :PP
3. Surface Treatment: Polished
4. Application: Basin
5. Style: Strainer
6. Drainage tube with ornamental cover
7. Waste oulet1-1/2” and 1-1/4” are available
Primary Competitive Advantages:
-Suitable for bathroom and kitchen and etc.
-it can withstand high pressure and temperature
-Well and High Quality Control
-Prompt Delivery
-Customers Designs and Logos are Welcome
-Competitive Price
-Earth-friendly Products
-In a Variety of Designs
-Small Order Acceptable
-ODM Accepted
-OEM Accepted